Description
This is one special firmware repair and data recovery solution for Western Digital Hitachi Helium hard drives with UNC error.
The patient drive with UNC error can be detected in bios and data recovery software but it is not possible to recover the lost data from the patient helium drives with UNC error. Users cannot run logical scan and cannot access to data sectors.
UNC Errors are something like below:
Users can contact us to get software to test if your patient drive is supported or not by this firmware repair solution.
Daniel –
Hi there!
Hope all is good with you over there
I have this case WD80EZAZ-11TDBA0 – Smart error (abr error).
Do you have a solution for this case as I read on this link UNC eror? https://www.dolphindatalab.com/recover-lost-data-from-wd-hitachi-helium-hard-drives-with-unc-common-firmware-failure/
Drive gets ready normal and shows full id but ABR error.
Amarbir –
Hello,
I have this hdd can we recover data ,Referring To This News – > https://www.dolphindatalab.com/recover-lost-data-from-wd-hitachi-helium-hard-drives-with-unc-common-firmware-failure/
Model : HUH721010ALE601
Serial : 7PKWEP9C
Firmware : LHGL0003
Capacity : 10 TB (19 532 873 728)
Regards
jeni –
Hello sir/mam Good day.
I’m currently working in United Arab Emirates Dubai. I want to enquire about the recovery of files on a wd helium drive 18tb since there is no Lab here in dubai who currently recover files from that said model.
I was wondering if you could help me recover my files. Thank you in advance.
Aaron –
Does your product support Helium drives such as HGST UltrastarHe12?
Payam –
Hello,
I saw this article:
https://www.dolphindatalab.com/recover-lost-data-from-wd-hitachi-helium-hard-drives-with-unc-common-firmware-failure/
We have a clients WD100EFAX HDD that powers up, gets detected but all sectors have UNC/read errors.
We do not have DFL tools, are we able to purchase this tool and try it out as a trial for 1 month, if we find it useful for us – we would like to buy this. Is this something you would do for us?
Martin –
Hello Dolphin-Team,
Can you give me a quotation for the firmware-fix on those helium drives. I have one that spins fine but gives no UA access.
Can you also tell me how this fix and how would it work? Do you have a tool for it or do I have to use me DDP?
Thank you,
Kind regards,
Jack –
Hello
WD102KRYZ Enterprise Gold 10 TB.
After turning PC on side when it was on, PC case got a slight hit, the HDD produced chirping sounds. Since then, on startup, HDD produces chirping sounds for about 20 seconds, then stops. Partition software and Disk Management cannot initialize, display I/O error. Shows no partitions.
HDD Image and Video of the sounds included here.
HDD is unopened. I have about 1-2 TB of data on it.
Can you do data recovery on this HDD?
Thanks
Martin –
Hello Sir,
Now I have some WD101EFBX-68B0AN0 (not a Helium drive) in and one gives UNC + ERR but no ABR. This should be the problem you are able to fix with this solution, right? Drive sounds normal. If the solution can fix the drive in my case I would like to order it (599 USD).
Please let me know how to do it.
Thank you!
Kind regards,
jennifer –
hi good day, i would like to ask if you can assist me, i have 18tb wd
helium drive and it was accidentally fallen. it has clicking sound.
could you still recover the files?
HeadMaster –
Hello friend, need firstly open drives to swap heads and then diagnose further for data recovery.