The new photo instructions to use the Seagate 7200.11 And 7200.12 Head Replacement Tool are available. For all users who have purchased the Seagate 7200.11 And 7200.12 Head Replacement Tool, please email to [email protected] to request the new instructions and manual. Seagate 7200.11 And 7200.12 Head Replacement Tool is .

FAIL Servo Op=00DF Resp=0007 is very common terminal error message for Seagate physical damaged hard drives. If this error keeps coming like below and never enter F3 T>, it is definitely head damage. Boot 0x80MFAIL Servo Op=0100 Resp=0003 0100 0000 0000 0001 0000 0000 0000 0000 0000 0000 0000 .

PreampFaultStatus is one very com terminal error for Seagate hard drives. PreampFaultStatus:ROM not original, read ROM and check SN, Model and compare with labelPreamp chip damage, not commonChange ROM modules to fix and see

Clicking hard drive data recovery case is one of the most common data recovery cases in our clean room and our clean room engineers are able to handle these cases properly. For all these clicking hard drives, users must have proper clean room environment and clean room head and .

If users want to buy one special WD unlock PCB of 2060-810011 to unlock the original HDD for firmware repair and data recovery, users need to pay attention to the quality of the unlock PCB because from the layout, it looks like the same but some users may get .

There’re some new western digital hard drives whose PCB number is 2060-800077-003 REV P1 and for these hard drives, the PCB has MCU lock and the ROM and firmware cannot be accessed. If these patient hard drives have firmware corruption, the patient HDDs may be not detected, wrongly detected .

WD Charger family HDD is another type of MCU locked HDD and if users want to repair the firmware corruptions of these HDDs, users need to get special unlock PCBs. 2060-800067 USB3.0 PCB>2060-800065 Unlock SATA PCBType C PCB 2060-810003>2060-800065 SATA Unlock PCB The size of 800065 unlock PCB is .

HDD Head Tools factory has recently helped two users to process the WD HDD Palmer 800066 unlock PCB issues. The two users don’t have good soldering skills and during the ROM chip soldering, the unlock PCB was damaged and the luck thing was that the ROM chip is still .